Products News

February 24, 2017

DIN 1630 ST44.4

The ST44.4 steel tubes of DIN1630 are designed to meet high performance requirements. Normally , there are no limiting values for the maximum permission working pressure of DIN 1630 ST44.4 seamless steel tubes. DIN 1630 ST44.4 steel tubes/pipes are predominantly used in the construction of chemical plants, vessels, pipework and […]
Do you like it?0
0 Read more
February 24, 2017

DIN 1628 ST52.4

DIN 1628 ST52.4 welded steel tubes/pipes are predominantly used in the construction of chemical plants, vessels, pipework and for general mechanical engineering purpose. The St52.4 steel tubes of DIN1628 are designed to meet high performance requirements. Normally , there are no limiting values for the maximum permission working pressure of […]
Do you like it?0
0 Read more
February 24, 2017

DIN 1628 St44.4

DIN 1628 St44.4 welded steel tubes/pipes are predominantly used in the construction of chemical plants, vessels, pipework and for general mechanical engineering purpose. The St44.4 steel tubes of DIN1628 are designed to meet high performance requirements. Normally , there are no limiting values for the maximum permission working pressure of […]
Do you like it?0
0 Read more
February 24, 2017

DIN 1628 ST37.4

DIN 1628 ST37.4 steel tubes/pipes are predominantly used in the construction of chemical plants, vessels, pipework and for general mechanical engineering purpose. The St37.4 steel tubes of DIN1628 are designed to meet high performance requirements. Normally , there are no limiting values for the maximum permission working pressure of DIN […]
Do you like it?0
0 Read more
February 24, 2017

DIN 2458 ST37.2

DIN 2458 Standard applies to the dimensions and the conventional masses per unit length of welded steel pipes according to the technical conditions of delivery as stipulated in DIN 1628 Part 1 to part 4, DIN 17172 and DIN 17177. St37.2 welded pipe also applies to other technical conditions of […]
Do you like it?2
0 Read more
February 24, 2017

JIS G3461 STB 510

JIS G3461 STB 510 steel tube/pipe JIS G3461 STB 510 used for exchanger heat on inside and outside of the tube, such as water tubes, smoke tubes, superheater tubes, air preheater tubes, etc. of the boiler, and heat exchanger tubes, condenser tubes, catalyser tubes, etc. used in chemical and petroleum […]
Do you like it?0
0 Read more
February 24, 2017

JIS G3461 STB 410

JIS G3461 STB 410 steel tube/pipe JIS G3461 STB 410 used for exchanger heat on inside and outside of the tube, such as water tubes, smoke tubes, superheater tubes, air preheater tubes, etc. of the boiler, and heat exchanger tubes, condenser tubes, catalyser tubes, etc. used in chemical and petroleum […]
Do you like it?0
0 Read more
February 24, 2017

JIS G3445

JIS G3445 Carbon steel tubes/pipes for machine structural purposes This Japanese Industrial Standard specifies the carbon steel tubes, hereinafter to as the “tubes”, used for machinery, automobiles, bicycles, furniture, appliances and other machine parts.
Do you like it?0
0 Read more
February 24, 2017

JIS G3444 STK540

JIS G3444 STK540 steel tube/pipe, seamless steel tubes/pipes and welded steel tubes/pipes JIS G3444 is the standard of carbon steel tubes for general structural purposes, STK540 steel tubes/pipes used for civil engineering, architecture, steel towers, scaffoldings, struts, piles for suppression of landslide and other structures.
Do you like it?0
2 Read more
February 24, 2017

JIS G3444 STK500

JIS G3444 STK500 steel tube/pipe, seamless steel tubes/pipes and welded steel tubes/pipes JIS G3444 is the standard of carbon steel tubes for general structural purposes, STK500 steel tubes/pipes used for civil engineering, architecture, steel towers, scaffoldings, struts, piles for suppression of landslide and other structures.
Do you like it?0
0 Read more
February 24, 2017

ASTM API 5L X70

ASTM API 5L X70 Seamless and Welding Steel Pipe/Tube ASTM API 5L X70 seamless and welding pipe/tube use for petroleum/ natural gas pipeline, for conveying water, drainage, coal gas, mineral slurry and other low middle pressure liquids. Also API 5L X70 can used for chemical industry, building structure, heat-supply and […]
Do you like it?0
0 Read more
February 24, 2017

ASTM API 5L X65

ASTM API 5L X65 Seamless and Welding Steel Pipe/Tube ASTM API 5L X65 seamless and welding Steel pipe/tube applications: construction, fence, greenhouse pipe, roller shutter doors, light gauge steel, tube, furniture, sports equipment, tents, guard rails, decoration, highway, steel structure engineering, gas/oil/water transportation and other industries. The mechanical properties steel […]
Do you like it?0
0 Read more
February 24, 2017

ASTM API 5L X60

ASTM API 5L X60 Seamless and Welding Steel Pipe/Tube ASTM API 5L X60 seamless and welding Steel pipe/tube mainly used for low pressure liquid delivery such as water, gas and oil; and for construction.   The mechanical properties steel pipe(MPa(psi) minimum): ASTM API 5L X60 Seamless and Welding steel Pipe […]
Do you like it?1
0 Read more
February 24, 2017

ASTM A106 Gr.C

ASTM A106 Gr.C seamless steel pipe/tube is a carbon steel pipe that used for high temperature service. This pipe is suitable for bending, flanging and similar forming operation, and for welding. A106 Gr.C seamless steel pipe is mainly used to conveying fluids, such as oil, natural gas, gas, water, and […]
Do you like it?0
0 Read more
February 24, 2017

ASTM A106 Gr.B

ASTM A106 Gr.B seamless steel pipe/tube is a carbon steel pipe that used for high temperature service. This pipe is suitable for bending, flanging and similar forming operation, and for welding. A106 Gr.B seamless steel pipe is mainly used to conveying fluids, such as oil, natural gas, gas, water, and […]
Do you like it?0
0 Read more
February 24, 2017

ASTM A106 Gr.A

ASTM A106 Gr.A seamless steel pipe/tube is a carbon steel pipe that used for high temperature service. This pipe is suitable for bending, flanging and similar forming operation, and for welding. A106 Gr.A seamless steel pipe is mainly used to conveying fluids, such as oil, natural gas, gas, water, and […]
Do you like it?0
0 Read more
February 24, 2017

ASTM A53 Gr.B

ASTM A53 Gr.B seamless steel pipe includes black pipe and hot dipped galvanized pipe, the diameter of of ASTM A53 Gr.B seamless steel pipe range from 21.3 mm to 720 mm, and wall thickness range from 2mm to 120mm. A53 Gr.B seamless steel pipe is used for general purposes of […]
Do you like it?0
0 Read more
February 24, 2017

ASTM A53 Gr.A

ASTM A53 Gr.A seamless steel pipe/tube ASTM A53 Gr.A seamless steel pipe includes black pipe and hot dipped galvanized pipe, the diameter of of ASTM A53 Gr.A seamless steel pipe range from 21.3 mm to 720 mm, and wall thickness range from 2mm to 120mm.
Do you like it?1
0 Read more
March 15, 2017

The development of steel tubular towers

Compared with foreign countries, the steel structure of transmission tower in China has a single variety, low strength value and little choice. When the tower load is large, only the composite section can be used to make up the shortage of material strength, and the workload and investment of design […]
Do you like it?0
Read more
March 28, 2017

ASTM/ASME A53/SA53 GR.B STD Seamless and Welded steel pipes

ASTM/ASME A53/SA53 seamless and welded steel pipe is a general, all-purpose pipe used in generator plants, refineries, compressor stations, natural gas transmission, and steam conduction. It is acceptable for welding, flanging, and bending. ASTM Specification A53 covers seamless and welded, black and hot-dipped galvanized nominal (average) wall pipe for coiling, […]
Do you like it?0
0 Read more
March 31, 2017

API 5L ISO3183 PSL1 & PSL2 seamless line pipe

transportation systems in the petroleum and gas markets. API 5L is suitable for conveying gas, water, and oil. Size variety is limited just by maker’s abilities. Requirements for API 5L abide by the International Organization for Standardization ISO 3183, which standardizes pipeline transportation systems within the materials, devices and offshore […]
Do you like it?0
0 Read more
May 3, 2017
Internal and External Coating Steel Pipe

Uses of Internal and External Coating Steel Pipe

Internal and external coating steel pipe due to the inner wall of epoxy resin, so the surface smooth, reduce fluid resistance, reduce flow resistance, increase the flow, and not scaling, not easy to breed microorganisms. To solve the ordinary fire water supply pipe and galvanized steel pipe buried and water […]
Do you like it?0
0 Read more
August 28, 2017
ASTM a500 carbon steel seamless pipe

ASTM A53 vs. ASTM A500 steel pipes

ASTM A53 steel pipe designations are different than ASTM A500 round hollow structural sections and they are manufactured to meet different standards. While ASTM A500 is available in cross-sections matching each of the cross-sections for ASTM A53steel pipe, there are many more cross-sections available in A500. Characteristics and Applications of […]
Do you like it?0
7 Read more
September 8, 2017

ASTM A106 seamless carbon steel pipes VS ASTM 53 High-Temperature Pipe

This ASTM specification is written so that the end user and the manufacturer can agree upon, and clearly understand, the properties and capabilities of the piping product being supplied. In contrast with national codes (like API, ASME or CSA), ASTM A53 is rarely stipulated by national or state-level legal requirements. ASTM […]
Do you like it?0
2 Read more
September 22, 2017
Grade N80 L80 Steel Casing Tube, Oil Field Pipe

L-80 AND N-80 CASING PIPE – MINIMUM COLLAPSE RESISTANCE OF CASING – UNDER AXIAL LOAD

Specialties: Threading Heat treating Drift testing (Full-length, or just ends) Hydrostatic Testing Full third-party inspection capabilities (EMI, SEA, and Weld Line) Coating to customer specifications Marker joints/Cut-to-length: Casing Design Example Design a 9 5/8-in., 8,000-ft combination casing string for a well where the mud wt. will be 12.5 ppg and […]
Do you like it?0
0 Read more
November 26, 2017

WELDED STEEL PIPE VS SEAMLESS STEEL PIPE PRODUCTS AND SIGNIFICANT PROCESSES

1.0 PRODUCTS AND SIGNIFICANT PROCESSES: 1.1 Products sketched out in this archive is as of now recognized by the title i.e. Sectoral Manual for STEEL PIPES, TUBES AND FITTINGS which however identifies with particular utilities like for conveying water, gas, air steam and so on., for use in basic purposes, […]
Do you like it?0
0 Read more
January 9, 2018

How does the casing pipe work ? Choose your casing tubing !

Once a well has been drilled, if it is to become a production well, the well must undergo completion. While drilling a well cuts through the rock formations and allows drilling engineers to reach the reservoir below, the raw sides of the well cannot support themselves. Similar to the bones of […]
Do you like it?1
Read more
January 16, 2018

What is the difference between casing pipe and well screen pipe?

Casing pipe definition: Casing is a series of steel pipes that are run into a drilled oil well to stabilize the well, keep contaminants and water out of the oil stream, and prevent oil from leaching into the groundwater. Casing is installed in layers, in sections of decreasing diameter that are […]
Do you like it?0
0 Read more
January 30, 2018

Why use Epoxy Coating Pipe? The definition of anticorrosive steel pipe.

The aging of steel tubes has prompted the birth of anticorrosive steel pipes： As carbon steel pipes age, they become subject to wear and tear. They develop weak spots, which can result in small leaks throughout the system. They can also gradually become unsafe, and eventually a failure may occur, […]
Do you like it?1
Read more
February 4, 2018
SSAW Corrosion Resistant Pipe

How to cut 3PE anticorrosion steel pipe ?

In the installation of 3PE anti-corrosion steel pipe In the early stage does not have the length of the plan, such as 3pe anti-corrosion pipe routine is 12 meters. But sometimes in some parts of the project need is 3 meters, this time need to 3pe anti-corrosion steel pipe cutting. […]
Do you like it?0
Read more
February 13, 2018

How to distinguish hot rolled seamless pipe and cold-rolled seamless pipe?

Hot-rolled seamless steel pipes and cold-rolled seamless steel pipes are formed by the process of steel or steel plate, they have a great impact on the microstructure and properties of steel, the rolling mill is mainly hot-rolled, cold-rolled only for the production of small steel and sheet. Description:  Standard ASTM […]
Do you like it?0
Read more
February 20, 2018

Carbon Steel pipe Bollards – Steel Pipe Security for Building Perimeters

Why choose steel pipe bollards Steel posts are one of the simplest, most cost-effective ways to offer protection for buildings and pedestrians from vehicle collisions, as both a physical and visual barrier. Steel bollards can be installed in any surface, indoors or outdoors, to prevent entry from errant vehicles, secure […]
Do you like it?0
Read more
March 23, 2018

Alloy stee pipe _ 16Mn , 15CrMo ,35CrMo, 42crmo

Production of 16Mn alloy steel pipe, 15CrMo alloy steel pipe, 35CrMo alloy steel pipe 42CRMO alloy steel pipe Professional manufacturer, complete specifications, quality assurance, factory outlets, A large quantity favorably. 42CrMo alloy steel Pipe The main use is for power plants, nuclear power, pressure cooker furnace, high-temperature superheater and Reheater […]
Do you like it?0
Read more
March 23, 2018

Comparison of international specifications of tubular products and their materials

  The following file indicates the various international standards for welded cold-formed structural tubing; round, square and rectangular. These specifications can be compared to the steel types that ABTERSTEEL COMPANY currently use in our roll forming of structural tubes and profiles. ABTERSTEEL  cold forms our structural welded steel hollow sections […]
Do you like it?0
Read more
April 4, 2018
ASTM A179 Low Temperature Carbon Steel Tube

What is the difference between ASTM A179 pipe and DIN 17175 pipe ?

ASTM A179 (ASME SA179) Pipe Description Cold drawn seamless carbon steel tube for heat exchangers and condensers Size (mm): O.D.:6.0~114.0; W.T.:1~15; L: max 12000 Description： 1. Standards: ASTM A179 (ASME SA179) 2. Applications: heat exchangers, condensers, heat transfer equipment and similar pipes. 3. Grade: A 179 4. Specifications: diameter 10.3 to […]
Do you like it?0
Read more
April 16, 2018

What are the properties and uses of carbon steel and alloy steel?

Different types of steel are produced according to the mechanical and physical properties required for their application. Various grading systems are used to distinguish steels based on these properties, which include density, elasticity, melting point, thermal conductivity, strength, and hardness (among others). To make different steels, manufacturers vary the type and quantity […]
Do you like it?1
Read more
April 22, 2018
ERW-HFW-HFI pipe

The difference between ERW, SSAW, LSAW(UOE) Steel pipe

According to the different pipe-making process, the steel pipe can be divided into seamless steel pipe (SML), which is mainly used as the internal oil collection pipe and small-diameter high-pressure natural gas transmission pipe. The number of long-distance oil and gas transmission pipelines is very small, and most of the […]
Do you like it?0
0 Read more
May 16, 2018
carbon-steel-pipe,boiler pipes

What is the OD, inner diameter, nominal diameter of steel pipe?

What is the outer diameter, inner diameter, nominal diameter of steel pipe? The diameter of steel pipe can be divided into outer diameter, inner diameter and nominal diameter. The outer diameter of the pipe with the antiseptic spiral steel pipe is denoted by letter D, followed by the size and […]
Do you like it?0
0 Read more
May 16, 2018
ssaw steel pipe

Spiral steel pipe manufacturing process

Spiral steel pipe production process and straight seam steel pipe is different: the strip coil as raw material, often warm extrusion molding, automatic double-wire double-sided submerged arc welding process welded spiral seam steel pipe. 1. Raw Material Inspection 2. Uncoiling 3. Rough Leveling  4. End Cutting and Butt Welding 5. […]
Do you like it?0
0 Read more
May 21, 2018
A53 Seamless & Welded (ERW) Steel Pipe

Steel weight calculation formula

Steel weight calculation formula  steel formula –steel weight calculation formula –mass calculated steel steel weight (kg) = 0.02466 × thickness × (outer diameter – wall thickness) × length  bar Weight (kg): Weight per meter = 0.00617 * diameter * diameter  rebar weight (kg) = 0.00617 × × diameter was calculated […]
Do you like it?1
0 Read more
June 3, 2018

Large diameter welded pipe main production process description:

1. Prospecting: After the steel plate used for manufacturing large-diameter submerged arc welded straight seam steel pipes enters the production line, a full-plate ultrasonic inspection is first performed; 2. Milling: Double-sided milling of the two edges of the steel plate by the edge milling machine to achieve the required plate […]
Do you like it?0
Read more
June 3, 2018
ssaw steel pipe

The difference between ERW steel pipe and spiral steel pipe

Steel pipes can be seen everywhere in our daily life. It is widely used in heating, water supply, oil and gas and other industrial liquids, which brings great convenience to our life and production. According to the tube forming technology, steel tubes can be roughly divided into the following four […]
Do you like it?0
Read more
June 16, 2018
astm-a53-pipe

Difference Between SCH 40 and SCH 80 Steel pipe

“Schedule 40” and “Schedule 80” refer to the thickness of the walls of pipes. “Schedule” is the standard of wall thickness that has been adopted by the American National Standards Institute. As per the Institute, the thickness of wall pipes varies from Schedule 10, Schedule 40, Schedule 80, and Schedule […]
Do you like it?0
Read more
July 8, 2018

WATER PIPELINE JOINING METHODS AND PIPE INSTALLATION

JOINING METHODS AND PIPE INSTALLATION This data sheet describes the most common joining methods of steel water mains and the most important phases of installation. Applications • water mains • sewage pipes   1. Trench, foundation and filling The trench is dug wide enough, according to Figure 1, so as to […]
Do you like it?0
Read more
July 19, 2018

Steel Pipe Coating Solution

Steel Pipe Coating Solution ABTER STEEL offers pipes with different coatings to meet the most stringent international standards for onshore and offshore oil and gas projects. In addition to our own coatings, we work closely with coatings manufacturers worldwide. Thanks to the know-how of coated pipes required for offshore operations, […]
Do you like it?0
Read more
August 3, 2018
api gas pipeline

What are the risks of natural gas pipeline construction?

Abstract: The construction of long-distance transportation natural gas pipeline system is to achieve the purpose of long-distance pipeline transportation of natural gas, so that users along the line can obtain the required gas volume to meet the needs of users.       The construction of long-distance transportation natural gas pipeline system is […]
Do you like it?0
Read more
August 17, 2018

What is the difference between pipe vs tube?

What is the difference between pipe vs tube? A pipe is a round tubular to transport or distribute fluids and gases. Steel pipes are designated by a nominal size value (NPS or DN), which represent a rough indication of their inside diameter and fluid conveyance capacity. A tube is a […]
Do you like it?0
Read more
September 12, 2018

Protective coating for petroleum pipe

Methods for preparation and construction of protective coatings for petroleum pipelines  [57] Abstract The invention provides a protective coating for oil pipes and wellheads and downhole equipment used in oil and gas drilling, oil recovery and transportation. The protective coating comprises, by weight percentage, 55 to 95% of polyphenylene sulfide, 3 […]
Do you like it?1
Read more
Prev page
1234
Next page