PRODUCTS - abter steel pipe manufacturer, natural gas casing and tubing,seamless steel pipe,OCTG,

July 12, 2017

EN10217-1 ERW Transmission Steel Tubes For Pressure Purposes

1. Outside Diameter: Ф219-Φ660mm 2. Wall Thickness: 6-22mm 3. Length: 3-12m 4. Steel Grade: Q345B, API X42 – X80, L245, L555,J55, N80 5. Standard: SY/T5037-2000, GB/T9711.1-97, API Spec 5L 6.End:square ends (straight cut, saw cut, and torch cut). or beveled for welding, beveled, 7.Surface: Lightly oiled, Hot dip galvanized, Electro […]

June 14, 2017

black steel pipes tubes astm a335 manufacturer

ASTM A53 Gr. B black carbon steel pipe for oil and gas pipelines

sizes:O.D : 21.3mm-712mm W.T : 0.5mm-25mm Less than 12 meters,5.8 m and 6m are common Length: 1. Single Random Length and double Random Length. 2. SRL:3M-5.8M DRL:10-11.8M or As clients requested length 3. fixed length(5.8m, 6m, 12m) Standard: API5L , ASTM A106 Gr.B, ASTM A53 Gr.B, ASTM A179/A192,ASTM A513-2007,ASTM A671-2006,ASTM […]

May 31, 2017

DIN 17175 oilfiled seamless steel boiler tube and boiler pipes

Steel grade: DIN17175 St35.8 DIN17175 St45.8 15Mo3 13CrMo44 10CrMo910 Chemical Composition of DIN 17175 seamless boiler pipes Standard Grade Chemical Composition Limits (%) C Si Mn P、S Cr Mo DIN 17175 St35.8 ≤ 0.17 0.10-0.35 0.40-0.80 ≤ 0.030 / / St45.8 ≤ 0.21 0.10-0.35 0.40-1.20 ≤ 0.030 / / 15Mo3 0.12-0.20 0.10-0.35 0.40-0.80 ≤ 0.030 / 0.25-0.35 13CrMo44 0.10-0.18 0.10-0.35 0.40-0.70 […]

May 26, 2017

API 5DP oil casing and tubing water well drill pipe

Casing: Casing is a large-diameter pipe that serves as the structural retainer for the walls of oil and gas wells, or well bore.It is inserted into a well bore and cemented in place to protect both subsurface formations and the wellbore from collapsing and to allow drilling fluid to circulate […]

May 24, 2017

ASTM A53 Grade B Carbon Steel seamless steel Pipes

ASTM A53 (ASME SA53) carbon steel pipe is a specification that covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8″ to NPS 26. A 53 is intended for pressure and mechanical applications and is also acceptable for ordinary uses in steam, water, gas, and air lines. […]

May 15, 2017

high pressure JIS G 3454 Seamless Carbon Steel Pipe

JIS G3454 carbon steel pipes are used for pressure conditions at an limited maximum temperature of 350℃. If you requires for higher pressure pipes shall consider JIS G 3455 standard. JIS G3454 Steel pipe can be manufactured into seamless steel pipe or electric-resistance welded steel tubes, the purchaser may designate […]

May 11, 2017

ASTM A519 St55 cold drawn precision structure steel tube

Standards: ASTM A519, DIN1629, DIN2391, ASTM A513, BS6323, EN10305-1, JIS3441 Sizes: OD: 10.3mm -711.2mm, W.T.: Hot finish: 0.250”-4.00”, Cold Drawn: 0.035”-0.875” Length: Random Length, Fixed Length, SRL, DRL. Heat Treatment: Annealed, Normalized, Stress relieved, Cold. Grade: Mechanical Tubing: 1010, 1020, 1045, 1518, 4118, 4130, 4135, 4140 Tube for Structures: ST37.0, […]

May 7, 2017

ASTM A53/A53M ERW Structural Pipe for low-pressure plumbing

ASTM A53 pipe covers Seamless and Welded, Black and Hot-Dipped Galvanized nominal (average) wall pipe for coiling, bending, flanging and other special purposes and is suitable for welding. Continuous-Welded pipe is not intended for flanging. Purpose for which pipe is intended should be stated on order. No. Name Standard Grades […]

May 5, 2017

ASTM A252 Grade 3 mild steel Pipe Piles,ERW Structural Pipe

ASTM A252 Grade 3 Steel Pipe is widely used as steel piling pipes, structure pipe piles. A252 Grade 3 pipe pile is manufactured under ASTM A252 Specification, which covers nominal (average) wall steel pipe piles of cylindrical shape and applies to a252 grade 3 pipe piles in which the steel […]