এএসটিএম A53 বনাম. এএসটিএম A500 স্টীল পাইপ

বিজোড় বয়লার ইস্পাত পাইপ এবং টিউব
এএসটিএম / তালা লাগান / নামক JIS / GOST বিজোড় বয়লার ইস্পাত পাইপ এবং টিউব
অগাস্ট 23, 2017
এএসটিএম A106 বিজোড় কার্বন ইস্পাত এএসটিএম বনাম পাইপ 53 উচ্চ-তাপমাত্রা পাইপ
সেপ্টেম্বর 8, 2017

এএসটিএম A53 বনাম. এএসটিএম A500 স্টীল পাইপ

এএসটিএম A500 কার্বন ইস্পাত বিজোড় পাইপ

এএসটিএম A500 কার্বন ইস্পাত বিজোড় পাইপ

এএসটিএম A53 ইস্পাত নল designations are different than ASTM A500 round hollow structural sections and they are manufactured to meet different standards. While ASTM A500 is available in cross-sections matching each of the cross-sections for ASTM A53steel pipe, there are many more cross-sections available in A500.

Characteristics and Applications of ASTM A500 steel pipes:

A500 steel pipes can be subjected to most of the usual fabricating operations. Ductility is good. It bends well, flattens, কাট, punches, flares and flanges easily, and can be welded by the commonly-used techniques and practices.Common uses for ASTM A500 pipe include hand rails, posts, storage racks, displays, আসবাবপত্র, Structural applications, Bollards, Micro-piling.

ASTM A500 applications include structural supports, building columns, highway signs, oil field services and communication towers, to name a few. All steel structures have their pros and cons, but ultimately ASTM A500 is the better choice when you need a round profile.

Characteristics and Applications of ASTM A53 ইস্পাত পাইপ :

Designed for coiling, bending and flanging, A53 কার্বন ইস্পাত নল is suitable for welding. The grades denote certain chemical and mechanical properties and should be noted in selection.A53 pipe is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, পানি, gas and air lines, Low pressure systems, Structural applications, Mechanical components, Bollards, খাপ

ASTM A500 is a structural specification, round HSS produced to this specification are fit for purpose when used for structural applications and general construction use. ASTM A53 is a pipe specification and is intended to be used in mechanical and pressure applications.

The specified yield strength of A500 Grade C (the most commonly available grade) হয় 46 KSI. The specified yield strength of A53 Grade B is 35 KSI. That’s over a 30% increase in yield strength. অতএব, A500 round HSS have greater strength-to-weight ratios than A53 pipes. তাই, with round HSS you need less steel, ওজন দ্বারা, to do the job—less weight equals less cost.

এএসটিএম A53 পাইপ ধরনের

The following types & grades of A53 pipe are covered within this specification:

Type F – Furnace-butt-welded, continuous welded Grade A
প্রকার ই- ইলেকট্রিক-প্রতিরোধের ঝালাই, A এবং B গ্রেড
টাইপ করুন এস- বিজোড়, A এবং B গ্রেড

 

 

 

1 মন্তব্য

  1. URL টি বলেন:

    1.2 This specification covers the following types and grades:

    1.2.1 Type F—Furnace-butt-welded, continuous welded Grade A,

    1.2.2 Type E—Electric-resistance-welded, A এবং B গ্রেড, এবং

    1.2.3 Type S—Seamless, A এবং B গ্রেড.

    bon-steel-pipe/astm-a53-vs-astm-a500-steel-pipes/ […]

উত্তর দিন