steel square tubing,1/2″ x 0.370″ x .065″ square hollow section
December 2, 2016
API 5CT J55 Seamless oil Casing and tubing,OTCG casing R3, 13-3/8 Inch
December 8, 2016
Pup Joints are used to adjust the height of full length tubing or casing strings. They are also used to adjust the depth of downhole tools. Pup Joint sets are available in: Integral Premium Thread Box-by-Pin Pin-by-Pin with couplings boxed separately Pin-by-Pin with couplings hand tight Pin-by-Coupling Box Flush joint connections
API 5CT,tubing and casing pup joint
(1)Standard: API 5CT
(2)Grade: J55,K55,L80,N80.P110
(3)Size: tubing 1.9″to4-1/2″, casing 4-1/2″to13-3/8”
(4)Type:STC,LTC,BTC,EUE,NUE
joint steel pipe and casing pup joint
|
Descriptions and size |
Type of Thread |
O.D*L(mm) |
Grade |
|
|
Tubing joint |
2-3/8″ |
NUE |
73.02*107.95 |
J55 K55 N80-1 N80-Q L80 C90 P110 |
|
2-3/8″ |
EUE |
77.80*123.82 |
||
|
2-7/8″ |
NUE |
88.90*130.18 |
||
|
2-7/8″ |
EUE |
93.17*130.35 |
||
|
3-1/2″ |
NUE |
107.95*142.88 |
||
|
3-1/2″ |
EUE |
114.30*146.05 |
||
|
4″ |
NUE |
120.65*146.05 |
||
|
4″ |
EUE |
127.00*152.40 |
||
|
4-1/2″ |
NUE |
132.08*155.58 |
||
|
4-1/2″ |
EUE |
141.30*158.75 |
||
Surface Treatment: Coating
Protection of Thread: Thread protector
Packing: By wooden case, wooden pallet, or according to customer specific requirements
Related posts
Induction bends come in standard bend angles (e.g. 45°, 90°, etc.) or can be custom made to specific bend angles. Compound bends (out-of-plane) bends in a single joint of pipe can also be produced. The bend radius is specified as a function of the diameter. For example, common bend radii for induction bends are 3D, 5D and 7D, where D is the nominal pipe diameter.
Duplex 2205 and Super Duplex 2507 stainless steel flanges are characterized by their high yield strength, which is twice that of the annealed yield strength of typical austenitic stainless steels, like 304 and 316 stainless steel flanges. Because of this, Duplex 2205 and Super Duplex 2507 steel are some of the most common grades of duplex used for flanges with Super Duplex 2507 flanges being the more corrosion resistant grade of the two.
