ASTM A53 seamless steel pipe OD 10 inch SCh40 60 80 120

ASTM A252 SCH40 GR 2 OD 34 inch DRL seamless steel pipes

October 27, 2016

ASTM A106 Grade B OD 300mm SCH80 SSAW pipe

October 31, 2016

ASTM A53 steel pipe OD 10 inch SCh40 60 80

astm a53 seamless steel pipe

ASTM A53 is a carbon steel alloy, utilized as structural steel or for low-pressure pipes. The alloy specifications are set by ASTM International, in spec ASTM A53/A53M.

A53 pipe can be found in three types and two grades, A53 Type F, which is longitudinally furnace butt bonded or constant bonded (Grade An only), A53 Type E, which is longitudinally electrical resistance bonded (Grades A and B), and A53 Type S, which is seamless pipe, produced by hot working, and potentially cold ending up, the steel (Grades A and B). ASTM A53 pipe is sized according to the small pipe size (NPS) system. It is commonly available with nationwide pipe thread ends or with plain cut ends. It can be utilized for steam, air, and water conveyance. It is also weldable and can be utilized in structural applications, although ASTM A500 tube, which is readily available in the very same NPS sizes, is sometime chosen.

This is a standard set by the standards organization ASTM International, a voluntary requirements advancement organizations that sets technical requirements for products, services, items, and systems.

Abter concentrates on ASTM A53 Steel Pipe Spec, our quality is as high as your demand. You will have the A53 grade B pipes from pipe size 1 inch to 26 inch. And the length could be single random length or double random length, the longest length we can do is 18 meter for stacking pipe applications.
Our factory established in 1995, we have more than 10 years experience in this location.

We participated in round carbon welded steel tube at the start of company established, now our technology is far ahead.
We have passed the requirements of API 5L, ASTM A53, ASTM A252, EN10219, ASTM A500, JIS G 3466, DIN EN10210, GB/T178 -2005, GB/T 3094-2000 and GB/T6728 -2002.

ASTM A53 Steel Pipe Pipe Diameter	10 inch/219.1
Diameter Tolerance	320.661mm ~ 327.139mm (acc. to ASTM A53, +/-1% of outside diameter))
Wall Thickness	STD, SCH 40, SCH 60, SCH 80, SCH 120, SCH 160 etc
Wall Thickness Tolerance	acc. to ASTM A53, +/- 12.5%t
Pipe Standard	ASTM A53, API 5L, CSA Z245, A106, ASTM A252, AS 1163, IPS 190 etc
A53 Steel Pipe Spec Pipe Grade	Grade A, Grade B or other steel grade required
A53 Steel Pipe Spec Pipe Test	Hydro test, UT test, Flatten test, Impact test, DWT test if agreed
A53 Steel Pipe Spec Pipe Test	etc
Hydro test pressure	As per ASTM A53 Spec
Length	SRL, DRL, Random length from 3m to 18m
End Finish	Bevelled ends with caps or steel protector
Application	Fluid pipe, line pipe, water pipe, structure steel tube, piling pipe, construction pipe, bridge pipe etc.
Pipe Coating	Black painting, varnish, anti rust oil, FBE, 3PE, 3 layer PE, 3PP etc.