Pipe Manufacturing Process
December 12, 2018ASTM A269 316L Stainless Tube Inspection Report
December 15, 2018
ASTM A179 / ASME SA179, ASTM A192 / ASME SA192 covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for heat exchangers, condensers, superheater and boiler, and similar heat transfer apparatus. The tubes are frequently ordered as follows:
|
Chemical compositions |
|
||||||||||
|
Mechanical properties |
|
||||||||||
|
Outside diameter (OD) |
1/2” – 7” (12.7mm-177.8mm) |
||||||||||
|
Wall thickness (WT) |
BWG 16-BWG 0 (0.065”-0.34”, 1.65mm-8.64mm) |
||||||||||
|
Pipe length |
Specific or random |
||||||||||
|
Pipe surface |
Coated with anti-corrosive varnish / oil |
||||||||||
|
Pipe end |
Square cut and with plastic protector (cap) at both ends |
||||||||||
|
Packing |
Bundled and wrapped with waterproof fabrics |
Related posts
The service temperature is 580 ℃, and the steel plate is required to have high high temperature endurance strength. The steel plate is delivered in the normalized and tempered state. 12Cr1MoVG alloy pipe is based on high-quality carbon structural steel, and one or several alloy elements are appropriately added to improve the mechanical properties, toughness and hardenability of the steel.
