7. Pelanggan boleh memilih saiz jurang paip saringan secara bebas antara 0.1mm-6mm untuk memenuhi keadaan pembinaan yang berbeza
April 12, 2022Paip saringan berlapis dua lapisan&Paip saringan kawalan pasir untuk telaga minyak
April 25, 2022- Paip berlubangKami membekalkan paip gerudi lubang pelbagai spesifikasi dan bahan serta menyediakan perkhidmatan gerudi lubang, dan anda dialu-alukan untuk menghubungi dan bertanya kepada kami!
Diameter paip gerudi lubang:114mm,127mm,140mm,168mm,178mm,219mm,245mm,273mm,325mm,406mm,426mm,530mm,630mm。
Bahan paip gerudi lubang: Keluli tahan karat, keluli karbon, J55,N80,dan L80.2. Paip penapis air untuk telaga geoterma
Paip penapis telaga geoterma terdiri daripada paip asas piawaian API dan paip penapis luka wayar berketepatan tinggi.
Paip penapis air luka wayar dibuat dengan mengimpal wayar belitan baji dan bar baji:
1.Ia mempunyai kapasiti galas tekanan yang kuat. Dengan sokongan paip asas lapisan dalam, walaupun paip penapis luaran cacat separa, jurang tidak akan meningkat, dan prestasi kawalan pasir akan lebih dipercayai. Ia sesuai untuk persekitaran perkhidmatan yang keras.
2.Jurang paip saringan lapisan luar adalah seragam, ralat adalah sekecil 0.05mm, yang boleh mengawal pasir dengan berkesan.
3.Ketumpatan jurang paip saringan adalah lebih baik daripada paip saringan lain, yang mengurangkan rintangan aliran dan sangat meningkatkan hasil air.
4.Continuous V-shaped structure reduces the water penetration speed and alleviates the pressure on the pipe body and the equipment.
5.Pipe diameter is smaller, which reduces the difficulty of drilling construction.
6.Materials of the base pipe is J55, K55, N80, etc of API standard, those of the outer-layer screening pipe is 304 stainless steel or high quality low carbon steel, and other materials can also be used in accordance with the customer’s requirements as well.3.Paip penapis air telaga penghawa dingin
The water filter pipe for air conditioning produced by our company is specially designed for water source heat pump system. It is used for water intake and recharge of water source heat pump well. This product has the following characteristics:
1.High porosity. The porosity of this product is over 25%. High porosity can reduce water flow penetration speed, reduce the flow resistance, not only improves the effect of water intake and recharge, but also saves the energy consumption of water pumping and recharge.
2.The gap is not be easily blocked. The gap structure is narrow outside and wide inside, and the gap will not be blocked by sand and stone, which prolongs the service life of the air conditioning well.
3.The pressure-bearing capacity of the pipe body is big. There is no weld on the surface of this product. Compared with other welded pipes, it has a higher ability to bear pressure.
4.Sand control effect is good. The gap control of this product is accurate, the error is small, outer-layer filter and sand particles can be effectively prevented into the well, and the loss of water pump equipment can be reduced.
5.Convenient for construction. Compared with bridge pipe and cement pipe, this product is light in quality, convenient for being put into the well and the risk and other unsafe factors brought by construction can be reduced.
6.Diversified materials. The pipe body is made of galvanized carbon steel, plastic sprayed carbon steel and stainless steel. Excellent material makes the pipe and filter material never stick with each other, which effectively ensure long-term permeability.Catatan: The above is the common specification, we can design for outer diameter, gap and porosity according to the customer’s requirement to meet the customer’s needs for use.