OCTG casing and tubing
API 5CT OCTG Casing Pipe with Threaded End, R1, R2, R3
October 19, 2017
Carbon Steel Line Pipes APPLICABLE SPECIFICATION – MATERIAL DESIGN TECHNOLOGY & Manufacturing Available Size Range (Carbon Steel Pipes)
November 19, 2017

ASTM A513 Type 1 low carbon steel tubings

carbon steel tubings,ASTM A513 carbon steel pipes

carbon steel tubings,ASTM A513 carbon steel pipes

Carbon steel, also called plain carbon steel, is a metal alloy, a combination of two elements, iron and carbon, where other elements are present in quantities too small to affect the properties. The only other alloying elements allowed in plain-carbon steel are manganese (1.65% max), silicon (0.60% max), and copper (0.60% max). Steel with a low carbon content has the same properties as iron, soft but easily formed. As carbon content rises the metal becomes harder and stronger but less ductile and more difficult to weld. Higher carbon content lowers steel’s melting point and its temperature resistance in general.

ASTM A513 Type 1 tube is produced from low carbon steel. Typically available in hot rolled black, hot rolled, P&O. Tubing with walls heavier than 18ga are produced from hot rolled steel. A513 Type 1 is produced to closer dimensional tolerances than A500 and chemistries that allow for bending.

ASTM A513 Carbon Steel Tube, in the as welded condition and furnished in 1008 to 1015 steel, it is the lowest cost mechanical tubing available. Wall thickness 18 gauge and lighter are produced from cold rolled steel. Heavier than 18 gauge is typically produced from hot rolled steel. Welding is usually done as ERW, Electric Resistance Weld. Typically available in hot rolled black or hot rolled P&O (Pickeled and Oiled).
TYPICAL CHEMICAL PROPERTIES

MT 1010MT 1015MT 1020
Manganese, %

.30 – .60

.30 – .60

.30 – .60

Carbon, %

.05 – .15

.10 – .20

.15 – .25

Phosphorus, Max %

.035

.035

.035

Sulphur, Max %

.035

.035

.035

Call today for a quote on A513 Type 1 tube.
SIZES of ASTM A513 Type 1 low carbon steel tubings

SquaresRectangles
½”Available in 16 ga. wall
  • 1” X ½”
Available in 16 ga wall
¾” thru 1¾”All available in 11 ga., 14 ga., and 16 ga. walls
  • 1½” X 1”
  • 2” X 1”
Available in 11 ga., 14 ga., and 16 ga. walls
2”Available in 14 ga. And 16 ga. Walls (11 ga. Is available as A500 Grade B)
  • 3” X 1”
  • 3” X 1½”; 3” X 2”
  • 4” X 2”
Available in 14 ga. Walls
2½” and 3”Available in 14 ga. walls (11 ga. is available as A500 Grade B)
  • 2½” x 1½”
  • 3” x 1½”
  • 3” x 2”
  • 4” x 2”
  • 4” x 3”
  • 5” x 2”
  • 6” x 2”
Available in 11 ga. as A500 Grade B
4” and 5”Available in 11 ga. as A500 Grade B)

*Typically CREW is available in 18 GA and lighter and OD sizes 2” and under

APPLICATIONS

A513 type 1 tube is used for furniture, storage racks, machine components, fences and more.

 

Leave a Reply