seamless steel pipe

March 23, 2018

ASTM A213 T9, T11, T22, T24, T91 Superheater Reheater Alloy Pipe Standard Specification

ASTM A213 / SA 213 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes   Standard     Steel Grade GB (China) ASME (U.S.A) DIN/EN (Euro) Applications Cr-Mo  Cr-Mo Steel 12CrMoG 12Cr2MoG 12Cr1MoVG 15CrMoG 10Cr9MoVNb SA-213T11 SA-213T22 SA-213T24 SA-213T91 12Cr1MoV 14MoV63 10CrMo910 X10CrMoVNb91 10CrMo5-5, 13CrMo4-5 Superheater tube  Reheater tube Grades TP304H, TP309H, TP309HCb, TP310H, TP310HCb, TP310HCbN, TP316H, TP321H, TP347H, TP347HFG (fine grained) and TP348H are modifications of Grades TP304, TP309S, TP309Cb, TP310S, TP310Cb, TP316, TP321, TP347, and TP348, and are intended for high-temperature service, such as for superheaters and reheaters. This specification covers minimum-wall-thickness, seamless ferritic […]
March 7, 2018

HIGH PRECISION & PRESSURE PIPE _ FUEL PIPE SERIES

Synopsis of process flow: Using high quality raw material: ST35,ST37 ST37.4 ST52.4, cold drawn, anaerobic bright heat treatment, nondestructive examination. Applicable standard: IS08535-1 (steel tubes for high pressure fuel pipe in compression ignition engine), IS00404-1992 (technical requirements for steel and steel product), IS06892-1984 (tensile testing for metal). Main feasure: High precision, excellent brightness, after heat treatment, steel tube inside and outside wall have no oxide layer, high cleanness inner surface, flushing the inner diameter, anti-rust oil painted. Total impurity<1.5mg/g. Maximun granule 8 degree(^0.2mm). Under high pressure, no deformation after cold bending, the complicated geometrical forming and machining can be realized. […]
March 7, 2018

Duplex Stainless Steel Seamless Pipe

Duplex stainless steel is composed by any two phase organization of the austenite, ferritic and martensite about half and half of the proportion. But it usually refers to the austenitic – ferrite duplex stainless steel, it possesses both austenite and ferrite stainless steel characteristics, which has the comprehensive mechanical properties of high strength and high toughness; good resistance to crevice cxjrrosion, pitting corrosion and stress corrosion cracking ability; good resistance to uniform corrosion ability; good welding performance, small thermal cracking tendency; high coefficient of thermal conductivity, small coefficient of linear expansion etc. It is widely used in methanol production of tubular reactor catalytic […]
March 3, 2018

DIN EN 10210 Structural Pipe, Chemical Compositon and Mechanical Properties

List of Standards and Ranges for Structural and Standard Application Structural and Standard Pipe ABTER STEEL produces hot finished structural hoLLow sections of non-aLLoy and fine grain steeL according to the standard DIN EN 10210-1,2 and coLd-formed seamless and welded carbon steeL structural tubing in rounds in accordance with ASTM A500. For standard uses such as steam, gas and water supply, TMK manufactures seamless and welded tube and pipe according to ASTM A53, EN 10208-1,2, DIN EN 10224 and EN 10255 specifications. Chemical Compositon DIN EN 10210 Contents %, not less Steel Grade Material Number C WT, mm Si Mn […]
February 20, 2018

Carbon Steel pipe Bollards – Steel Pipe Security for Building Perimeters

Why choose steel pipe bollards Steel posts are one of the simplest, most cost-effective ways to offer protection for buildings and pedestrians from vehicle collisions, as both a physical and visual barrier. Steel bollards can be installed in any surface, indoors or outdoors, to prevent entry from errant vehicles, secure vulnerable areas, and protect site assets. As the population, especially in urban centers, continues to grow, so too does the number of vehicles on the road. With the increase of drivers and cars in and around cities, the likelihood of accidents and collisions has gone up as well. Properly planned […]
February 13, 2018

How to distinguish hot rolled seamless pipe and cold-rolled seamless pipe?

Hot-rolled seamless steel pipes and cold-rolled seamless steel pipes are formed by the process of steel or steel plate, they have a great impact on the microstructure and properties of steel, the rolling mill is mainly hot-rolled, cold-rolled only for the production of small steel and sheet. Deascription:  Standard ASTM A106, ASTM A53, API 5L Gr.B, DIN17175, etc Material ASTM A106B, ASTM A53B, ST52, ST37, ST44, ST45, etc Outer Diameter 20mm – 610mm Wall Thickness 2 mm – 70mm Length 3-12m, random or fixed, as the clients’ requests Technology Cold drawn or Hot rolled Tolerance Control with in the standard, OD:+-1%, […]
January 8, 2018

Bearing Pile, welded pipe Piles for construction

Bearing Piles 4 TYPES: 1. ELECTRIC RESISTANCE WELD PIPE (ERW PIPE PILES) Electric Resistance Weld pipe is normally produced in sizes from 2 3/8 inch OD thru 24 inch OD. Electric Resistance Weld pipe Piles ERW Wall Thickness (inches) Outside Diameter (inches) lbs / ft 0.188 0.219 0.250 0.312 0.375 0.438 0.500 0.625 0.750 8.625 16.96 19.68 22.38 27.73 33.07 38.33 43.43 10.75 21.23 24.65 28.06 34.81 41.59 48.28 54.79 12.75 25.25 29.34 33.41 41.48 49.61 57.65 65.48 14 27.76 32.26 36.75 45.65 54.62 63.50 72.16 16 31.78 36.95 42.09 52.32 62.64 72.86 82.85 102.72 18 41.63 47.44 58.99 70.65 […]
December 15, 2017

Line pipes for the oil and gas

Line pipe is a type of pipe that is manufactured from high strength carbon steel. It is typically made according to metallurgical specifications that were developed by the American Petroleum Institute (API). Line pipe can be used to build pipelines that transport a variety of resources including natural gas, oil, petroleum, and water. Steel line pipe has been used successfully for decades now in the transportation of gases, flammable liquids and solids. Given the high pressure levels frequently involved in the transportation of these media, steel is the optimum pipe material and it remains unparalleled in terms of safety and […]